DC Power Supply Module

The device can accept up to two extractable DC Power Supply modules. These power supplies are of load-sharing type connected in 1+1 topology, therefore allowing power redundancy.

The Power Supply modules are hot-swappable and therefore, a faulty module can be replaced while the system is up and running.

The Power Supply module is available as a spare part. For replacing Power Supply modules, see Replacing Power Supply Modules.

DC Power Supply Module

DC Power Supply Module Description

Item #	Description
1	LED for indicating power status:
	Color State Description Green On The DC power output is good. Amber Flashing The Power Supply module is faulty. - Off Indicates one of the following: ■ An internal power supply malfunction. ■ The power source is disconnected.
2	Handle for extracting and installing module.
3	DC terminal block.
4	Release latch for releasing / securing module from / to chassis slot.